Double Glazed Window Repair
It's worth checking the warranty included with most double-glazed windows. In general, it covers problems with the window hardware such as hinges and locking mechanisms within the first 10 years.
Mist between the glass windows is often caused by a crack in the seal, and it's something that needs to be repaired quickly to prevent mould or damp developing in your property.
Condensation Between the Windows
If you notice condensation forming between your windows, this could be an indication that the sealing in the gas insulating the windows has failed. upvc window repair can be a serious problem that should be addressed as soon as possible particularly in winter, when humidity is at its highest. This could also cause damage to sills, sealant and mould.
Ideally double-glazed windows shouldn't be able to experience condensation between the panes. This problem can be caused by excessive humidity or a particularly cold snap. This issue is usually resolved without the need to replace the entire window. A professional can drill tiny holes in the glass and then spray the inside of the window with a special cleaning solution. The moisture is then sucked out of the window, and an anti-fogger device can be installed to stop any further buildup of moisture in the future.
Condensation can also occur between windows due to air leakage, or other factors outside the window. If this is the case, it will likely take longer for the moisture to accumulate in the window as the air must be warm enough for the water molecules to vaporise. In these situations, it may be better to replace the double glazed windows rather than repair the existing sealed units.
A double-glazed window is constructed consisting of three or two pieces of insulated glass held together by a frame made of metal. The gap between the two of the window is filled with a non-toxic gas for insulation such as argon or krypton and then sealed tightly. The seal blocks the gases that are insulating from escape and also prevents moisture and air from getting into the gap.
As windows age, seals may deteriorate allowing moisture to leak between the glass panes. It is crucial to recognize when seals are beginning to leak because it indicates that the double glazing is no longer performing as well as it did in the past. This could result in a decrease in efficiency in energy use, higher heating bills, property damage, and the risk of condensation forming between the windows.
Mist
It is perfectly normal to see condensation on your windows. This means that your double glazing system is working properly and is keeping warm in your home. The condensation occurs because the air outside is hotter than the glass, and reaches the dew point of the window before the air inside. This is one of the great advantages of having high-quality double glazing.
If the condensation is located on the side of your window, this can be a sign of a ventilation issue in your home. The excess moisture won't be absorbed and end in the carpet, window, furniture, and other areas of your home. This can be prevented by having it inspected by an expert and ensuring that there is enough fresh air inside your home.
Another reason for mist on double-glazed windows is because the seal between two glass panes has broken. This can be caused by wear and tear, or through the use of chemical cleaning solutions. If this occurs it is best to have the windows repaired as soon as you can.
The professional repair of your windows will ensure that they remain waterproof and free of fogging, condensation and misting. It's also cheaper than replacing the windows, and you'll save money on your energy bills.
A FENSA registered window installer will provide you with a cost estimate for the repair or replacement of your double glazed windows. Upgrade your windows to energy-efficient A-rated ones if they are very old.
It is a good idea to keep copies of any warranties and agreements with your window fitting company. It can be helpful in the event that you have any future problems with your windows. You can contact your window fitters and work out the problem. This is a better option than ignoring the problem and causing more problems for your home.
Close or open without difficulty
When double glazed windows are difficult to open and close it isn't just annoying but it could also result in an increase in energy costs due to loss of heat and drafts. It can also pose a security risk, especially if the locks don't work correctly. It is essential to fix any issues with double glazed doors and windows as soon as you discover them.
If you've tried to open your window using the simplest methods, like using a screwdriver or tapping on the frame using a solid object, the problem could be more serious. The window may have moved and needs to be reset or there may be a gap in between glass and frames. In either case, contact a double glazing repair specialist to ensure the repairs are completed correctly and to avoid any further issues.
It is not unusual to find UPVC window handle and lock mechanisms to become difficult to operate or get stuck particularly if they're old and worn. This is caused by a build up of dirt or grease within the handle. This can be cured by cleaning it using a uPVC cleaner. If this doesn't help, you can try gently tapping the uPVC frame using a hard object, such as a screwdriver, being careful not to scratch the handle or the window handle mechanism.
If this does not solve the problem it is likely that the window needs to be replaced because the hinges may no longer be in the correct position or the locking mechanism could be damaged. In this instance, you should contact a UPVC window specialist.
David The Window Wizard specialises in all technical aspects of double-glazed repair of doors and windows, including fixing a jammed or shut double glazing window. He has vast experience changing old window mechanisms to modern ones. This can often save you the cost of replacing the entire window. For more information or to book a free quote call or email us today.
Warping
Double glazed windows are often a great option for saving energy in the home. They are made up of two separate panes that have a spacer, or dense gas in between them. This creates a seal that keeps cold air out and warm inside. In time, however windows can be damaged or broken and require repair. Most repairs can be made without having to replace the entire window.
Warping is a typical issue when double-glazed windows are installed. This occurs when windows begin to bend or twist, or bow. This can impact the structural integrity and insulating capabilities of the window. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.
If your double-glazed windows are starting to crack, it's important to contact a specialist immediately to prevent the problem from getting worse. They will be able to inspect your windows to pinpoint the root cause. They will make use of special tools to correct your issue and make sure that your windows are fully sealed again.
Water vapour can cause this issue because it can accumulate between the windows over time. It can be caused by a variety of factors, including the weather, humidity levels and temperature variations. To remedy this the expert will make a small hole through the glass to let out the moisture. They will then apply an agent to clean the glass and apply an adhesive to keep it dry in the future.
If your windows aren't able to be closed or opened it could be due to a broken mechanism or hinges. It is recommended to grease these parts of the window prior to calling a professional as this can often solve the issue and reduce the need for replacements. If your windows are very old or are not providing the insulation you'd like to have, it is often better to replace them.